A couple of weeks ago I introduced a concept for a finish edge for the Micropolis modules. Today I would like to introduce my solution for an outside corner. The outside corner is fairly easy. A standard finish module snaps on to one side. The other side can take a similar finish module but we need to fill in the 3x3 gap. So outside corners are solved with a standard module and a secondary outside module that has an extra 3 studs of length. The extra street module needs to snap into the Micropolis module as well as the straight street module. There are a few extra pieces involved but otherwise it is the same as the straight street.
Parts you will need:
1 1x1 plate
1 1x3 plate
2 1x8 plate
9 2x3 plate
2 2x2 inverted slope 45
4 3x2 inverted slope 33
1 1x1 technic brick with hole
1 1x2 technic brick with hole
1 1x2 technic brick with 2 holes
tiles as needed for street and sidewalk (staggering recommended for strength).
Connect with pins to the quarter block module and
straight edge module.
No comments:
Post a Comment