LEGO Micropolis Finish Edges - Inside Corners

It's been a while since I posted some examples of how I finish the street edges of my Micropolis blocks.  The final piece of the puzzle is the inside corners for when you have an 'L' shaped layout.  As with the other edges, these are built with 16x16 modules in mind.  They can easily be repeated and used for larger layouts.  This inside corner will easily connect to the straight edges and outside corners previously posted.

Please note that the corner if this module can be very weak if you don't take proper care to overlap elements.  As with the other modules you can substitute pieces as needed, just be sure to overlap joints.

Parts you will need:


1   1x2 brick
1   1x3 brick

2   1x3 plate
1   1x4 plate
3   1x8 plate
1   2x2 corner plate
14 2x3 plate
4   2x2 inverted slope 45
6   3x2 inverted slope 33
2   1x1 technic brick with hole
2   1x2 technic brick with hole
tiles as needed for street and sidewalk (staggering recommended for strength).

Don't miss the 1x3 and 1x4 plate near the back

Bricks in the back.  Yes, the 2x2 corner plate is floating.  Firmly attach it in the next step.